Commercial Roof Replacement Companies

Safety Tips You Must Follow at a Construction Site

Construction sites are hazardous places to work and there are safety tips you should follow, because a majority of accidents can be prevented by adopting simple measures and proper working procedures. To make construction sites, safe and secure places to work in, work must be done carefully and appropriate safety measures taken, to lessen the work injury cases.

Basic Safety Rules to Follow

  • Construction sites must be tidied up all the time and the passages kept clear. The debris must be removed at the earliest.
  • The materials should be sorted out and piled up safely ensuring that the stacks are not too high.
  • The floor openings should be kept fenced or covered. Sufficient lighting must be provided for adequate visibility
  • The location and operation of fire-fighting equipment must be known to all.

Safety measures for Construction Site Workers

  • The dangerous part of the machine should be installed with a guard before it is operated.
  • Since there may be some dangerous places not covered or fenced, areas with insufficient lighting must be avoided.
  • Site workers must be watchful at all times, looking out for hooks, moving cranes, or other lifting equipment.
  • The condition of electric cables of any electrical installation or tool must be checked before its use.
  • Electric cables must not be dragged on the ground and their contact with water must be avoided.
  • Electrical tools must be installed with an earth leakage circuit breaker before they are used.
  • Chemicals must be used and handled with care.

Measures for Personal Safety

  • Protective equipment must be worn all the time you are on the site.
  • Stay away from drinks or drugs while working.
  • Personal hygiene must be maintained.
  • Unsafe conditions must be reported immediately to the supervisor if noticed.

Emergency Response Measures for Accidents

Awareness of the working environment and adherence to the supervisor’s instructions is necessary. In the event of an evacuation during an emergency, stay calm and find out:

  • The dangerous situation which has set off the alarm.
  • The routes for evacuation.
  •  The safe areas designated by the company that you must run to.

In case of a serious injury, you should:

  • Stay calm but seek help immediately.
  • Attend to the injured person, and provide first aid.
  • Help with the immediate rescue work as much as possible.
  • Inform the site safety staff.
  • Do not try to move the injured person, unless it is absolutely necessary to do so.
  • The accident scene must not be tampered with till the arrival of the investigation team.

When a fire breaks out, you should remember:

  • A small fire can be put out with a fire extinguisher.
  •  If the blaze is out of control, do not try to extinguish the fire on your own. The Fire Services Department must be called immediately.
  • The emergency telephone numbers posted on the notice board in the site office must always be kept note of.

Measures for Workplace Safety

When working on False work: 

  • Confirm if the false work is erected as per the design.
  • Ensure whether the false work is securely erected.
  • The struts of the false work should be well secured.
  •  Ensure that the props are erected vertically and arranged at a suitable distance in a row.
  •  Report to your supervisor when any unsafe situation is found.

When working on Scaffolding:

  • Before use, confirm if the scaffolds have been erected by trained workmen, under the supervision of a knowledgeable person.
  • The scaffold must be inspected and certified safe by a competent authority before use.
  • The instructions of the competent person should be strictly followed. The scaffold must not be altered by anyone unless authorized to do so. Never work on an unfinished scaffold.
  •  When it is necessary to work on a mobile scaffold, lock the wheels of the scaffold before you start working.
  •  Do not work on a scaffold unless it has been provided with a suitable working platform. Fencing.
  • No work should be done in a hazardous place unless all the floor edges and openings have been fenced.
  •  If you notice any dangerous places that have not been installed with fencing or the fencing has been damaged, reinstall or repair the fencing. If this is beyond your capability, inform your supervisor at once.

When working on a Ladder:

  • Use a ladder that is of good construction, sound material, and adequate strength.
  • The ladder should be examined before use and inspected at regular intervals.
  • The ladder should be placed on a level and have a firm footing.
  • Place the ladder at an appropriate angle.
  • The ladder should be of sufficient length and its upper end should be at least 1 metre above the landing against which the ladder is propped.
  • Do not use a ladder unless its upper or lower end has been securely fixed or secured by another worker.
  •  If there are electrical installations nearby, do not use metal ladders.
  • Use a suitable working platform If working 2 metres or more above the floor.

When Lifting Appliances and Gear

  • The lifting appliances should be operated by trained workers, and crane operators should be certified.
  • Before using lifting gear such as hook, shackle or chain sling, check whether there is any wear and tear.
  • The weight of the load to be lifted should be checked and the safe working load of a lifting appliance or lifting gear must not be exceeded.
  • Adopt the correct lifting method.
  • Do not use a lifting appliance or lifting gear unless it has been examined and certified safe by a competent examiner.
  • A lifting appliance should have been regularly repaired and maintained by a competent authority, before use.
  • No unauthorized repair is allowed.
  • The manufacturer’s safe working instructions for a lifting appliance must be strictly followed.
  • Do not work beneath any suspended load.

When Working with a Material Hoist

  • The workers should not ride on material hoists.
  • The material hoist should not be operated without prior proper training.
  • The safe working load of a material hoist should not be exceeded.
  • The material hoist should be used only after it has been examined and certified safe by a competent examiner.
  • Do not use a material hoist unless its gates have been installed with an effective interlocking safety system. The hoist is only operable after all the gates have been closed.
  • Use a material hoist only if it has been repaired and maintained by a competent person. No unauthorized repair is allowed.
  • Do not put loose materials into receptacles unless properly secured.
  • Ensure good communication with the operator of a material hoist by understanding and following all his signals.

Commercial Roof ReplacementWhen Load shifting Machinery 

  • Unless you are a worker concerned, do not work in an area where a loader, an excavator, etc. is in operation.
  • Do not operate any load shifting machinery without training and approval.
  •  Operators of forklift trucks, bulldozers, loaders, excavators, trucks or lorries should possess appropriate certificates.

Preventing Cartridge-operated Fixing Tool hazards

  • A cartridge-operated fixing tool can be operated only by a valid certificate holder.
  • While operating a cartridge-operated fixing tool, suitable eye and ear protectors must be worn.
  •  Use a cartridge-operated fixing tool with great care Portable Power Tool
  • The dangerous parts of a portable power tool such as saw, grinder and drill must be effectively guarded before use.
  •  Place the electric cable and hose of a tool at an appropriate position to avoid tripping Cartridge-operated Fixing Tool hazards

When Working with Compressed Air 

  • Compressed air should be used only for specified purposes.
  • Only good construction compressed air equipment, pipes, and relevant devices, examined and certified safe by a competent examiner must be used.
  •  Fix the connectors properly.
  •  Do not twist the pipes.
  • Do not abuse the use of compressed air for cleaning purpose. A vacuum cleaner or brush should be used to remove dust from skin and clothing

When Working with Electric Tool 

  • Check the tool. its plug, and connecting cable, before using an electric tool.
  •  Do not use a damaged tool.
  • Check that the electric tool’s connecting cable is well protected, before using it.
  • Do not use an electric tool unless its metal casing is earthed and its power supply is provided with an earth leakage circuit breaker.
  •  Do not repair or alter any electrical installation unless competent to do so.
  •  If you meet any fault or problem, report it to your supervisor immediately

During Excavations 

  • The fence on all sides of an excavation should be intact.
  • Safe access should be used for ingress and egress.
  • No soil or other materials should be piled at the edge of an excavation.
  • Make sure that a trench is securely shored before working in it.

During Gas Welding and Flame Cutting 

  • Only those aged 18 years and above, holding a valid certificate must be allowed to use the equipment for gas welding or flame cutting.
  • Only those gas cylinders that are fitted with flashback arrestors, must be used.
  •  Wear personal protective equipment.
  •  Keep the workplace clean.
  •  Place fire extinguishers within reach.
  • The gas cylinders must be kept in an upright position, and secured properly to avoid overturning.
  • Any gas leakage detected, must be reported to the supervisor immediately.

Preparing for Fire Risk 

There is always a fire risk. However, the chances of fire can be reduced, and you will know what to do when a fire breaks out if you:

  • The workplace must be kept clean and tidy at all times.
  • The machinery and tools that may generate sparks or heat, must be handled carefully.
  •  Do not smoke or use naked flames in any area where flammable and explosive substances are stored.
  • The location and use of fire extinguishers must be known to all.
  • The place of assembly for fire evacuation must be known to all.

Caring for Public Safety

  • Members of the public are not aware of the risks of the work carried out on construction sites, hence attention must be paid to public safety.
  • Preventing the fall of materials from height is a must as it can be hazardous.
  • Materials should not be stacked on floor edges or scaffolds.

During Waste Disposal

  • All unwanted materials, and was tamest be disposed of at a designated place.
  • The supervisor must be notified of the requirement for the separate disposal of chemical or inflammable wastes.
  •  Do not leave planks with nails on passageway.

The above tips if followed meticulously can save precious lives and property on your construction site.

Armadillo Roofing & Exteriors (512) 333-7663, provides commercial roof repair, commercial roof installation and commercial roof replacement services to Austin, Texas and the surrounding communities and has been providing commercial roofing services to the area for over 19 years. For help with commercial metal roofing, you can find all the information you need at our other site here.

Commercial Roof Replacement

5 Common Causes Of Commercial Roof Failures

Roofs are not meant to last forever, and Mother Nature is responsible for many commercial roof failures. With commercial roofs and systems, other different factors or combinations of these factors can result in a roof failing prematurely. When this happens, it could lead to cascading problems such as indirect damage to the actual structure itself or interior damage. This is all coupled with the dramatic costs of having to replace the roof. Fortunately, most commercial roofs that fail (not all of them) are preventable.

Why Do Commercial Roofs Fail

The initial step to delay or prevent a commercial roof from failing is to know about the different risk factors. Keep reading to find out more about the most common reasons why commercial roofs fail as well as what you can do to reduce the risks or prevent these failures.

Poor Roof Design

Unfortunately, most roofing systems will have a shorter life span from the onset. When the roofing system itself was installed or designed with inefficient moisture or drainage management systems ponding water can promote bacteria and mold growth. This will deteriorate the surfaces and result in corrosion and rust of the flashing, metallic truss plates, and more.

Another common problem is blistering which occurs when water vapor becomes trapped in the layers of the roof. In many instances, poor roof designs are also linked to the structure of the building itself, and not the roof installation. Without adequate ventilation from inside, warm vapor will rise inside the structure of the building and collect and condense beneath the cool membrane. If the roof deck or building is designed poorly, even a professional roof installation will not last the way it should.

Deterioration Or Aging

Even the most professional commercial roof systems eventually fail, and this is due to deterioration and/or aging. However, there are a few factors that could cause a roof system to deteriorate faster. Some of the examples that lead to this include debris and dirt collection, excess foot traffic, mold growth, etc.

Environmental Factors

Commercial Roof Repair ContractorsNatural elements are unavoidable when it comes to the life expectancy of a roof. In certain cases, the failure of a roof could be prevented by being proactive and responsive, in a few severe cases. But unfortunately, failure is eventually unavoidable.

The more common environmental factors which can cause a roof to fail to include:

  • Wind damage. High winds usually from storms dislodge roofing materials across the roof deck.
  • Water intrusion. Leaks can start emerging when there is consistent precipitation which could arise due to vulnerable areas in the flashing, joints, or seams, causing an increase in deterioration once the water has intruded.
  • Standing water. Excess rain combined with the process of aging, or a poor installation often results in excess water that stands on the surface of the roof which accelerates deterioration.
  • Thermal cycling. Dramatic shifts between cold and hot temperatures can make roofing materials weaker and cause them to crack. This happens seasonally and if these events happen days apart.
  • Excessive heat. Extended heat waves may also speed up roof deterioration.
  • Impacts. Hail and falling debris can result in tears and punctures to the membrane of the roof.
  • Pollutants. Constant exposure to air pollution and toxic chemicals can also weaken the overall integrity of a commercial roof.

Substandard Workmanship

It is also possible to select the best quality roofing materials, take every precaution possible with the design, and the roof system stills fail since it was not installed properly. Common installation mistakes include improperly installed joints and flashings, inconsistent heat-sealing, not enough adhesives, etc. Workmanship failures could also arise during normal maintenance and repairs, and mistakes in workmanship could create a problem when one did not exist before.

Low-Quality Materials

Unfortunately, with so many roofing manufacturers to choose from, not every company maintains high-quality control levels. This means that there are many commercial roofing products out there that are subpar, and prone to tears, punctures, premature deterioration, and leaks. These are all destined to fail often and early. Not even the top craftsmanship will compensate for roofing materials that are faulty.

Armadillo Roofing & Exteriors (512) 333-7663, provides commercial and residential services to Austin, Texas and the surrounding area. This includes roof repair, roof installation and roof replacement. We have been providing professional commercial roofing services to the area for over 19 years. Call us when you need help assessing any damage to your commercial roof. If your building has metal roofing, visit us at our other site –

Contact Us For Your Free Estimate!

Simply Fill Out The Form Below or Call Us Now

Commercial Roof Repair, Commercial Roof Replacement and Commercial Metal Roof Restoration for the Austin Area

Commercial Roof Repair

Need commercial roof repair? At Armadillo Roofing we offer customers affordable commercial roof repair options.

Commercial Roof Installation

Modified Bitumen, White Membrane, Metal or Green Roofing Systems, we can install the highest quality roof on your commercial building.

Commercial Metal Roof Repair

We'll keep your property's Metal Roofing System in top-notch condition with our extensive experience and expertise with Commercial Metal Roofing Systems.

Commercial Metal Roof Restoration

Let us show you how you can save a lot of money, as much as 30-40%, by restoring your commercial metal roof instead of replacing it.

About Us

I’m Mark Franz, the owner of Armadillo Roofing & Exteriors.

I’m proud to say no one can beat our quality and experience in commercial roof repair, commercial roof installation, commercial roof replacement, commercial metal roof repair and commercial metal roof restoration in Austin, Texas.

Some of Our Latest Projects

Check out these recently completed commercial roofing projects.

Whether you’re looking for commercial roof installation, commercial roof repair, commercial roof maintenance, commercial metal roof repair or commercial metal roof restoration, we here at Armadillo Roofing have you covered.

With Commercial Roofing we are experienced in Modified Bitumen, White Membrane, Metal, Tile, Shingle, Green and all Flat Roofing systems.

You can save a lot of money, as much as 30-40% over a replacement, by taking advantage of our commercial metal roof restoration services.

Some of Our Latest Projects

Here at Armadillo Roofing, nothing is more important than taking care of the most important asset we have – our satisfied customers.

We take pride in the number of 5 star reviews you will find online that our customers have posted.

We will always deliver on our promise to ensure the finest quality materials and craftsmanship, stressing integrity and rewarding excellence. We are craftsmen who take pride in the roofing services we provide to our customers, both commercial and residential.

Our commitment is to deliver “Quality Craftsmanship at an Affordable Price,” and we have been doing just that for well over a decade now in Austin and the surrounding areas.

“Thanks for taking care of us in a professional manner. It was a pleasure to deal with someone who actually did what he said he would do. Look forward to seeing you soon. Thanks again.”

Mike McCoy – Mission Mortgage

“Thanks for a job well done. I look forward to working with you in the future. Let me know if you need any references on your future jobs. I’d be glad to be of help. Take Care.”

Mike Wilson – Central Texas Development Assessments, Inc.,

“Thank you again for your hard work. You did an amazing job on our building’s roof system and I would certainly recommend Armadillo to anyone needing your services.”

A.W. Armstrong – Kestrel Management Services, LLC

“Armadillo Roofing replaced our old roof with a beautiful new one. David managed the entire process to the detail. He was there during the work and walked the roof with me after it was finished. Quality, friendly and trustworthy best describes our experience with Mark and David at Armadillo.”

Lisa Y. – Austin

“We had an amazing experience with Armadillo Roofing and can’t say enough positive things about them. They replaced our entire roof in time to put our house on the market.”

Court C. – Cedar Park

“A hail storm left us with roof damage. Armadillo was referred to us and we couldn’t be happier. David was onsite at the start and finish of each phase to ensure everything was done properly. Mark is engaged and responsive anytime we had questions. They do great work! I would recommend Armadillo to anyone.”

Danny W. – Austin